Ok so not long ago i bought my first evo-all for my truck with a t-harness and intalled/programed everything myself with zero issues and it has been awesome. A few days ago a co-worker came to me and asked me to install the same kit on his truck which just so happened to be the same model and year as my truck so i agreed know it should be a simple deal.
Unfortunatly after the install I have been chasing issue and having problems the constantly. It started with a problem were the truck would intermittently begin to start with the command start and crank for 1 second then suddenly stop with no error lights. I tried to fix this assuming the yellow postive wires connection was bad or loose so I soldered the joint, heat shrinked it and taped it up to make sure it was secure. i tested it after that and had three succesfull starts in a row.
The next morning my coworker came to me and said it did the same thing were it tried to start for 1 second and then stopped. I went back in and varified all the connections and made damn sure my soldered joint was good. I then attempted to reflash the module and reload everything and now when i get to step 8 were you enter the key for the second time and then turn it to run and it should go from red and blue to blue flashing, it just goes to no lights at all. I tried this twice with no success so i continued on and dcrypted the module and tried to start the truck and the module doesnt sense the key.Im at a loss, can you help?